How to import Colombian Machine

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Colombian Machine of the bundle Colombian Machine. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Colombian Machine.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Legionario Grieszmar.mdx

Now Click the "Import File" Button:

Next select 'Legionario Grieszmar.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file Legionario Grieszmar.mdx.

Importing footman_alterac_hombreras.blp

Now Click the "Import File" Button:

Next select 'footman_alterac_hombreras.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file footman_alterac_hombreras.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file footman_alterac_hombreras.blp.

Importing footman_alterac_yelmo_corintio.blp

Now Click the "Import File" Button:

Next select 'footman_alterac_yelmo_corintio.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file footman_alterac_yelmo_corintio.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file footman_alterac_yelmo_corintio.blp.

Importing Human_ArthasMenethil_Main_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_ArthasMenethil_Main_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_ArthasMenethil_Main_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_ArthasMenethil_Main_Diffuse.tif_baked.tga.

Importing Human_Footman_Helmet_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_Footman_Helmet_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_Footman_Helmet_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_Footman_Helmet_Diffuse.tif_baked.tga.

Importing Human_Footman_Main_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_Footman_Main_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_Footman_Main_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_Footman_Main_Diffuse.tif_baked.tga.

Importing Human_Footman_Pauldron_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_Footman_Pauldron_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_Footman_Pauldron_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_Footman_Pauldron_Diffuse.tif_baked.tga.

Importing Human_Footman_Shield_Diffuse.blp

Now Click the "Import File" Button:

Next select 'Human_Footman_Shield_Diffuse.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_Footman_Shield_Diffuse.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_Footman_Shield_Diffuse.blp.

Importing Human_Footman_Sword_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_Footman_Sword_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_Footman_Sword_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_Footman_Sword_Diffuse.tif_baked.tga.

Importing Human_MagrothTheDefender_Cloak_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_MagrothTheDefender_Cloak_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_MagrothTheDefender_Cloak_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_MagrothTheDefender_Cloak_Diffuse.tif_baked.tga.

Importing Human_MagrothTheDefender_Hair_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_MagrothTheDefender_Hair_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_MagrothTheDefender_Hair_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_MagrothTheDefender_Hair_Diffuse.tif_baked.tga.

Importing Human_MagrothTheDefender_Main_diffuse.dds_baked.tga

Now Click the "Import File" Button:

Next select 'Human_MagrothTheDefender_Main_diffuse.dds_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_MagrothTheDefender_Main_diffuse.dds_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_MagrothTheDefender_Main_diffuse.dds_baked.tga.

Importing Human_Male_Corpse_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_Male_Corpse_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_Male_Corpse_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_Male_Corpse_Diffuse.tif_baked.tga.

Importing Human_SirGregoryEdmunson_Main_Diffuse.tif_baked.tga

Now Click the "Import File" Button:

Next select 'Human_SirGregoryEdmunson_Main_Diffuse.tif_baked.tga' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_SirGregoryEdmunson_Main_Diffuse.tif_baked.tga:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_SirGregoryEdmunson_Main_Diffuse.tif_baked.tga.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: